F-MS 12 ST GY1 – Type 2 surge protection plug

F-MS 12 ST GY1 – Type 2 surge protection plug 2801282

Surge Protection Devise (SPD) อุปกรณ์ป้องกันฟ้าผ่า ไฟกระโชก จาก Phoenix Contact / Germany

Product properties

• IEC test classification II T2
• EN type T2
• IEC power supply system TN TT
• Number of positions 1
• Surge protection fault message optical
• Arrester can be tested with CHECKMASTER from software
• version: From SW rev. 1.10

Insulation characteristics

• Overvoltage category III
• Pollution degree 2
• Electrical properties
• Nominal frequency fN
• 50 Hz (60 Hz)
• Connection data
• Connection method pluggable

Protective circuit

• Mode of protection N-PE
• Direction of action N-PE
• Nominal voltage U 240/415 V AC (TN – only N-PE) N
• 240/415 V AC (TT – only N-PE)
• Nominal frequency fN
• 50 Hz (60 Hz)
• Maximum continuous voltage UC 260 V AC
• Residual current IPE ≤ 5 µA
• Standby power consumption PC ≤ 1.5 mVA
• Nominal discharge current In (8/20) µs 20 kA
• Maximum discharge current Imax (8/20) µs 40 kA
• Follow current interrupt rating Ifi 100 A (260 V)

Voltage protection level Up
≤ 1.5 kV
≤ 0.4 kV (at In)
≤ 0.25 kV (at 10 kA)
≤ 0.15 kV (at 5 kA)

Residual voltage Ures
≤ 0.1 kV (at 3 kA)

Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 1.5 kV
TOV behavior at UT
1200 V AC (200 ms / withstand mode)

Response time tA
≤ 100 ns

Ambient conditions

• Degree of protection IP20
• Ambient temperature (operation) -40 °C … 80 °C
• Ambient temperature (storage/transport) -40 °C … 80 °C
• Altitude ≤ 2000 m (amsl)
• Permissible humidity (operatio5 % … 95 %
• Shock (operation) 25g
• Vibration (operation) 5g