Type 2 อุปกรณ์ป้องกันฟ้าผ่า ไฟกระชาก plug F-MS 12 ST

Type 2 surge protection plug
F-MS 12 ST – 2817990

Surge protection plug type 2, with N-PE total current spark gap for base element.

– IEC test classification: II, T2
– EN type: T2
– IEC power supply system: TN, TT
– Type: Male
– Product type: Replacement plug
– Number of positions: 1
– Surge protection fault message: optical
– Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10

– Insulation characteristics
– Overvoltage category: III
– Pollution degree: 2

– Mode of protection: N-PE
– Direction of action: N-PE
– Nominal voltage UN: 240/415 V AC (TN – only N-PE), 240/415 V AC (TT – only N-PE)
– Nominal frequency fN: 50 Hz (60 Hz)
– Maximum continuous voltage UC: 260 V AC
– Residual current IPE: ≤ 5 µA
– Standby power consumption PC: ≤ 1.5 mVA
– Nominal discharge current In (8/20) µs : 20 kA
– Maximum discharge current Imax (8/20) µs: 40 kA
– Follow current interrupt rating Ifi: 100 A (260 V)
– Voltage protection level Up: ≤ 1.5 kV
– Residual voltage Ures: ≤ 0.4 kV (at In), ≤ 0.25 kV (at 10 kA), ≤ 0.15 kV (at 5 kA), ≤ 0.1 kV (at 3 kA)
– Front of wave sparkover voltage at 6 kV (1.2/50) µs: ≤ 1.5 kV
– TOV behavior at UT: 1200 V AC (200 ms / withstand mode)
– Response time tA: ≤ 100 ns