Type 2 อุปกรณ์ป้องกันฟ้าผ่า ไฟกระชาก plug VAL-MS 230 ST

Type 2 surge protection plug
VAL-MS 230 ST – 2798844

Surge protection connector type 2 with high-capacity varistor for VAL-MS base element,
thermal monitoring, visual fault warning. Design: 230 V AC

– IEC test classification: II, T2
– EN type: T2
– IEC power supply system: TN, TT
– Type: DIN rail module, two-section, divisible
– Product type: Replacement plug
– Number of positions: 1
– Surge protection fault message: optical
– Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10

– Mode of protection: L-N, L-PEN
– Direction of action: 1L-N/PE
– Nominal voltage UN: 240/415 V AC (TN), 240/415 V AC (TT)
– Nominal frequency fN: 50 Hz (60 Hz)
– Maximum continuous voltage UC: 275 V AC
– Residual current IPE: ≤ 0.45 mA
– Standby power consumption PC: ≤ 120 mVA
– Nominal discharge current In (8/20) µs: 20 kA
– Maximum discharge current Imax (8/20) µs: 40 kA
– Short-circuit current rating ISCCR: 25 kA
– Voltage protection level Up: ≤ 1.35 kV
– Residual voltage Ures: ≤ 1.35 kV (at In), ≤ 1.1 kV (at 10 kA), ≤ 1 kV (at 5 kA), ≤ 0.9 kV (at 3 kA)
– TOV behavior at UT: 335 V AC (5 s / withstand mode), 440 V AC (120 min / safe failure mode)
– Response time tA: ≤ 25 ns
– Max. backup fuse with branch wiring: 125 A (gG)