Type 2 surge protection plug - VAL-MS 60 ST

Type 2 surge protection plug - VAL-MS 60 ST (2807573)


Surge protection plug type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 60 V AC

IEC test classification:     II / T2
EN type:               T2
IEC power supply system:             TN
Type:     Male
Product type:     Replacement plug
Product family:  VALVETRAB MS
Number of positions:      1
Surge protection fault message: optical
Arrester can be tested with CHECKMASTER from software version:            From SW rev. 1.10
Insulation characteristics
Overvoltage category:    III
Pollution degree:             2

 
Nominal frequency fN:   50 Hz (60 Hz)
Connection method:       pluggable

Mode of protection:        L-PEN
Direction of action:         1L-N/PE
Nominal voltage UN:      60 V AC (TN) / 60 V DC / -48 V DC (RRH)
Nominal frequency fN:   50 Hz (60 Hz)
Maximum continuous voltage UC:            75 V AC / 100 V DC
Residual current IPE:       ≤ 0.45 mA
Standby power consumption: PC              ≤ 35 mVA
Nominal discharge current In (8/20) µs:  15 kA
Maximum discharge current Imax (8/20) µs:        40 kA
Short-circuit current rating ISCCR:            25 kA
Voltage protection level Up:        ≤ 0.55 kV
Residual voltage Ures:    ≤ 0.55 kV (at In)
≤ 0.425 kV (at 10 kA)
≤ 0.325 kV (at 5 kA)
≤ 0.275 kV (at 3 kA)
TOV behavior at UT:       100 V AC (5 s / withstand mode)
Response time tA:           ≤ 25 ns
Max. backup fuse with branch wiring:      125 A AC (gG) / 50 A DC (gG)

 

Download datasheet

*สินค้ารับประกัน 1ปี
*ออกใบกำกับภาษีได้
*เงื่อนไขเป็นไปตามที่บริษัทกำหนด

LineOA: @bluestonethailand