Type 2 surge protection plug VAL-MS 230 ST
Attribute:
SKU : 2798844
Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 230 V AC
Brand : Phoenix Contact
Share
Type 2 surge protection plug
VAL-MS 230 ST - 2798844
Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 230 V AC
IEC test classification: II, T2
EN type: T2
IEC power supply system: TN, TT
Type: DIN rail module, two-section, divisible
Product type: Replacement plug
Number of positions: 1
Surge protection fault message: optical
Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10
Mode of protection: L-N, L-PEN
Direction of action: 1L-N/PE
Nominal voltage UN: 240/415 V AC (TN), 240/415 V AC (TT)
Nominal frequency fN: 50 Hz (60 Hz)
Maximum continuous voltage UC: 275 V AC
Residual current IPE: ≤ 0.45 mA
Standby power consumption PC: ≤ 120 mVA
Nominal discharge current In (8/20) µs: 20 kA
Maximum discharge current Imax (8/20) µs: 40 kA
Short-circuit current rating ISCCR: 25 kA
Voltage protection level Up: ≤ 1.35 kV
Residual voltage Ures: ≤ 1.35 kV (at In), ≤ 1.1 kV (at 10 kA), ≤ 1 kV (at 5 kA), ≤ 0.9 kV (at 3 kA)
TOV behavior at UT: 335 V AC (5 s / withstand mode), 440 V AC (120 min / safe failure mode)
Response time tA: ≤ 25 ns
Max. backup fuse with branch wiring: 125 A (gG)
Download datasheet
Line: @bluestonethailand
